Fusion splicers are an essential tool for fiber optic network installation and maintenance professionals. They are used to splice two fiber optic cables together in a permanent, low-loss joint. The quality of a fusion splicer can impact the overall performance of a fiber optic network.
In this article, we will highlight the top 6 best fusion splicers on the market. These splicers have been selected based on their performance, durability, ease of use, and cost-effectiveness.
Check out the thorough reviews of the best fiber fusion splicer in 2023 below.
List of The Best Fiber Fusion Splicer.
Fujikura 90S+ Fusion Splicer:
Fujikura 90S+ is a fusion splicer with high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.
The 90S+ possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The tool finds the true core position and achieves consistent lower splice loss. The device features fiber discrimination function: it automatically identifies the optimum arc discharge parameters in accordance with the fiber type.
Fujikura 90S+ has faster automated features that reduce installation time. The user can complete the entire splicing process without touching the tool and only moving the fiber. The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out.
Features
* Battery life increased up to 500 recharge cycles.
* Increased electrode lifetime – up to 5000 splicing cycles with one set.
* 5-inch color TFT touch screen display.
* The tool can connect two cleavers simultaneously.
* Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
* Operation manual is installed into the splicer.
* Time for placing fiber into heater is 50% lower compared to the Fujikura 80S.
* Easy fiber protection sleeve positioning.
* The lid of the carrying case may be used as a work table.
* Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
* The sheath clamp is compatible with loose tube fiber.
* Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
* Splicing time: 7-9 sec (SM FAST mode).
* Heat time: 13-15 sec (for 60 mm sleeves).
* Core alignment technology.
* Advanced image processing technology.
* Fiber discrimination function.
* The faster automated features.
* Time for opening wind protector is 80% lower compared to the Fujikura 80S.
Fujikura 88S+ Fusion Splicer:
Fujikura 88S+ is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.
The 88S+ possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The tool finds the true core position and achieves the consistent lower splice loss. The device features fiber discrimination function: it automatically identifies the optimum arc discharge parameters in accordance with the fiber type.
Fujikura 88S+ has faster automated features that reduce installation time. The user can complete the entire splicing process without touching the tool and only moving the fiber. The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out.
Features
* Splicing time: 7-9 sec (SM FAST mode).
* Heat time: 13-15 sec (for 60 mm sleeves).
* Core alignment technology.
* Advanced image processing technology.
* Fiber discrimination function.
* Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
* Operation manual is installed into the splicer.
* Battery life increased up to 500 recharge cycles.
* Increased electrode lifetime – up to 5000 splicing cycles with one set.
* 5-inch color TFT touch screen display.
* The lid of the carrying case may be used as a work table.
* Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
* The sheath clamp is compatible with loose tube fiber.
* Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
* The tool can connect two cleavers simultaneously.
* The faster automated features.
* Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
* Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
* Easy fiber protection sleeve positioning.
Comway C10S Fusion Splicer:
Comway C10S is a fusion splicer and a fiber endface melter, all in one. It is a powerful and stable tool with 6 motors which enable precise core alignment. The splicer is used for splicing SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZ / NZDS (ITU-T G.655), BI (ITU-T G.654) fibers, and also for splicing EB (ITU-T G.654) used in 5G installations. The tool is equipped with a high-performance heater that provides a faster and more power-saving machining process, and a stable and durable ceramic fiber presser.
The large capacity battery and resistance to the most unfavorable environment conditions (high temperature, humidity, altitude, and wind velocity) allows using Comway C10S in the field. The high-quality tool's screen ensures clear viewing of results even under bright sunlight.
Features
* Automatic fiber identification (SMF, MMF, DSF, NZDSF, BIF, other).
* Six motors enable precise core alignment.
* Smart ARC control technology provides stable work under any conditions.
* Low power consumption.
* 2 in 1: a fusion splicer and a fiber endface melter.
* Used for splicing EB (ITU-T G.654) fibers used in 5G installations.
* Low power consumption.
* Fast and power saving high-performance heater.
* Up to 750x fiber magnification when viewing the X or Y axes separately.
* Stable and durable ceramic fiber presser.
* The high-quality screen ensures clear viewing of results even under bright sunlight.
* Removable large capacity battery. Fully charged performs over 500 times splicing and heating.
Fujikura 41S+ Fusion Splicer:
Fujikura 41S+ is a V-groove cladding alignment fusion splicer for SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655) single optical fibers. Typical splice time: 6-9 seconds, typical tube heating time: 16-24 seconds. Bluetooth® 4.1LE wireless connectivity improves efficiency and reduces maintenance time.
Fujikura 41S+ is able to estimate the splice loss as accurately as possible. Also, the device is equipped with a touch panel for easy operation, and comes in a multifunctional case with integrated workstation.
Features
* Easy protector positioning.
* Bluetooth capability connection.
* Core loss estimation function.
* Touch panel with easy operation.
* Multi-functional carrying case with integrated work station.
* Active V-groove splicer.
* Typical splice time: 6-9 seconds.
* Typical tube heating time: 16-24 seconds.
* Equipped with CT-50 cleaver.
Sumitomo Type-82C+ Fusion Splicer:
Sumitomo Type-82C+ is a direct core monitoring fusion splicer for ultra fast splicing in any environment.
Features
* Touch-screen operation.
* Ultra fast splicing: 5 sec.
* Ultra fast heating: 9 sec.
* Upgrades software via internet.
* Remote interactive maintenance via internet.
* Equipped with onboard user training video.
* Supports bi-directional splicing operation.
* Dust-resistant, water-resistant and shock-proof.
* Compact & lightweight (only 1.9 kg).
* Automatic arc calibration.
* G.657 fiber auto-splice function.
* Automatic fiber identification (SMF, MMF, DSF, NZDSF, BIF, other).
FiTeL S179A Fusion Splicer:
The FITEL S179 Hand-Held, Core Alignment Fusion Splicer offers powerful performance, delivering fast and reliable optical fiber splicing even under harsh environmental conditions. By combining speed, precision, durability, portability and state-of-the-art communication methods in one unit, this fusion splicing machine opens the door to an entirely new range of applications. The FITEL S179 Fusion Splicer is highly effective for use in data centers, longhaul operations, Metro, LAN, and FTTx fiber, including ultra bend-insensitive fibers as well as large area effective fibers.
Features:
* High-speed splicing and heating1
* Ruggedized body design
* Easy, intuitive operation
* Compatible with Splice-OnConnectors (SOC)
* State-of-the-art communication methods
* Quick and easy maintenance
* Exceptional performance for fast and consistent fiber splicing
* Enhanced ease of use and portability
1 comment
Nice Information