Fujikura 90S+ Fusion Splicer With CT-50 Cleaver

Fujikura 90S+ is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.

The 90S+ possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The tool finds the true core position and achieves the consistent lower splice loss. The device features fiber discrimination function: it automatically identifies the optimum arc discharge parameters in accordance with the fiber type.

Fujikura 90S+ has faster automated features that reduce installation time. The user can complete the entire splicing process without touching the tool and only moving the fiber. The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out.

Attention! The Fujikura 90S+ model is identical to the Fujikura 88S+, except that the 90S+ can be configured with any language for its interface, while the 88S+ is only available in English.

Features

• Splicing time: 7-9 sec (SM FAST mode).
• Heat time: 13-15 sec (for 60 mm sleeves).
• Core alignment technology.
• Advanced image processing technology.
• Fiber discrimination function.
• The faster automated features.
• Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
• Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
• Easy fiber protection sleeve positioning.
• The lid of the carrying case may be used as a work table.
• Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
• The sheath clamp is compatible with loose tube fiber.
• Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
• The tool can connect two cleavers simultaneously.
• Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
• Operation manual is installed into the splicer.
• Battery life increased up to 500 recharge cycles.
• Increased electrode lifetime – up to 5000 splicing cycles with one set.
• 5-inch color TFT touch screen display.

Technical Specifications

Package Contents

• Fusion Splicer Fujikura 90S+ — 1 pc.
• Battery (BTR-15) — 1 pc.
• AC Adaptor (ADC-20) — 1 pc.
• AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
• USB Cable (USB-01) — 1 pc.
• Fusion Splicer Strap (ST-02) — 1 pc.
• Spare Electrodes (ELCT-16B) — 1 set.
• Fiber Holder Set Plate (SP-03) — 1 set.
• Carrying Case (CC-39) — 1 pc.
• Work Tray Left (WT-09L) — 1 pc.
• Work Tray Right (WT-09R) — 1 pc.
• Work Tray J-Plate (JP-09) — 1 pc.
• Tripod Screw (TS-03) — 1 pc.
• Carrying Case Strap (ST-03) — 1 pc.
• Alcohol Dispenser (AP-02) — 1 pc.
• Quick Reference Guide (QRG-02-E, C or J) — 1 pc.
• Single Fiber Stripper (SS-03 or SS-01) — 1 pc.
• Optical Fiber Cleaver (CT-08) — 1 pc.
• Fiber Scrap Collector (FBD-05) — 1 pc.
• Fiber Setting Plate (AD-10-M24) — 1 pc.
• Case for Cleaver (CC-37) — 1 pc.
• Hexagonal Wrench (HEX-01) — 1 pc.

TRANSLATE with x

English

Arabic	Hebrew	Polish
Bulgarian	Hindi	Portuguese
Catalan	Hmong Daw	Romanian
Chinese Simplified	Hungarian	Russian
Chinese Traditional	Indonesian	Slovak
Czech	Italian	Slovenian
Danish	Japanese	Spanish
Dutch	Klingon	Swedish
English	Korean	Thai
Estonian	Latvian	Turkish
Finnish	Lithuanian	Ukrainian
French	Malay	Urdu
German	Maltese	Vietnamese
Greek	Norwegian	Welsh
Haitian Creole	Persian

TRANSLATE with

COPY THE URL BELOW

Back

EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal

Back